Contiki Shell

From Contiki
Revision as of 22:45, 8 November 2014 by Hegdea (Talk | contribs)

Jump to: navigation, search

Back to Contiki Tutorials


Introduction

The Contiki Shell is an interactive on-mote UNIX-­style shell that allows for text‐based interaction with a sensor node or a network of sensor nodes through a set of commands that can be executed on a UNIX like command line terminal. It has features such as piping data, run in background, file system interaction, network commands, sensor measurement commands and system commands. The shell can be accessed either over a serial USB connection or over a network using Telnet.

Below are the various instances of shells provided in Contiki:

1) example-shell: This shell can be compiled only for the native target, but not on Tmote Sky due to the firmware image size limitation on the Tmote Sky.

2) sky-shell: This shell is a thinned out version, which can be compiled on Tmote Sky nodes, allowing the firmware image to fit the Tmote Sky memory.

3) sky-shell-exec: This shell is a further thinned out version and has features such as the exec command allowing to load and execute ELF files.

4) sky-shell-webserver: This is a shell that features the command sky-all-data, allowing to collect different sensor measurements and network statistics from a Tmote Sky mote.

In this tutorial, we will run the shell over a USB serial connection and will focus on example-shell, sky-shell provided in Contiki source.

Objective

At the end of this tutorial, goal is to make you at ease with the Contiki shell.

I enjoyed working with the Contiki Shell, I hope at the end you have a good learning:)

You will learn

In this tutorial you will learn about the following topics:

1) How to get a Contiki Serial Shell up and running on Tmote sky nodes.

2) Various Contiki Shell Commands, their usage and Contiki shell programming.

3) How to create your own Shell Commands.

4) How to create your own Shell for Contiki through an example project.

5) You get to execute various fun examples and understand the Contiki shell along the way.

Sounds exciting ? Game for it ? Let's begin then!

Source Code and Example Projects

Let's figure out where the source code for shell is in Contiki

This folder has all the source and headers for the Contiki Shell

~/contiki-2.7/apps/shell

This folder has the example-shell project

~/contiki-2.7/examples/example-shell

This folder has the sky-shell project

~/contiki-2.7/examples/sky-shell

How to Compile and Install a Contiki shell ?

example-shell is a Comprehensive Shell and can be used for initial development.

Pros: It's compiled on the native target, so you have the flexibility of developing your own shell commands and include it in the shell for further testing. Since, there's no stringent memory constraints on native targets, this project is useful for initial development phase.

Cons: Since this shell has comprehensive set of shell commands, it increases the memory footprint of the firmware and hence can't be compiled on Tmote Sky motes.

Navigate to this path to find the example-shell project : ~/contiki-2.7/examples/example-shell

example-shell.c is the shell file in this project.

*** Each shell_xx_init() adds a set of features to shell, hence if you run out of space while compiling try removing these. ***

These shell_xx_init() are located in contiki-2.7/apps/shell/ in files like shell-filename.c. You can explore the source code to check for what features they come with and what's in it, to make our lives simpler. 

/*---------------------------------------------------------------------------*/
PROCESS(example_shell_process, "Contiki shell");
AUTOSTART_PROCESSES(&example_shell_process);
/*---------------------------------------------------------------------------*/
PROCESS_THREAD(example_shell_process, ev, data)
{
  PROCESS_BEGIN();

  serial_shell_init();

  shell_base64_init();
  shell_blink_init();
  /*shell_checkpoint_init();*/
  /*shell_coffee_init();*/
  shell_download_init();
  /*shell_exec_init();*/
  shell_file_init();
  shell_httpd_init();
  shell_irc_init();
  shell_netfile_init();
  /*shell_ping_init();*/ /* uIP ping */
  shell_power_init();
  /*shell_profile_init();*/
  shell_ps_init();
  /*shell_reboot_init();*/
  shell_rime_debug_init();
  shell_rime_netcmd_init();
  shell_rime_ping_init(); /* Rime ping */
  shell_rime_sendcmd_init();
  shell_rime_sniff_init();
  shell_rime_init();
  /*shell_rsh_init();*/
  shell_run_init();
  shell_sendtest_init();
  /*shell_sky_init();*/
  shell_tcpsend_init();
  shell_text_init();
  shell_time_init();
  shell_udpsend_init();
  shell_vars_init();
  shell_wget_init();

  PROCESS_END();
}

As we see above some of the shell_xx_init() are already commented out, this done on the pretext that these features are not supported on native target.

Compiling and installing the Contiki shell on native target 

cd contiki-2.7/examples/example-shell 
make

Run the Contiki Shell on native target 

./example-shell.native

After running the Contiki Shell, you will see the Contiki Shell prompt 

user@instant-contiki:~/contiki-2.7/examples/example-shell$ ./example-shell.native 
Contiki 2.7 started
Rime started with address 2.1
MAC nullmac RDC nullrdc NETWORK Rime
2.1: Contiki>

Punch in help on the Contiki Shell prompt to see all the available shell commands in Contiki shell. 

help

You can now run any supported shell commands

For example, running echo hello will echo the <text> back on the shell prompt. 

2.1: Contiki> 
echo hello
hello
2.1: Contiki>

sky-shell is a thinned out version of Contiki Shell for Tmote Sky motes.

Navigate to this path to find the sky-shell project : ~/contiki-2.7/examples/sky-shell

sky-shell.c is the shell file in this project

*** Each shell_xx_init() adds a set of features to shell, hence if you run out of space on the mote try removing these. ***

/*---------------------------------------------------------------------------*/
PROCESS(sky_shell_process, "Sky Contiki shell");
AUTOSTART_PROCESSES(&sky_shell_process);
/*---------------------------------------------------------------------------*/
#define WITH_PERIODIC_DEBUG 0
#if WITH_PERIODIC_DEBUG
static struct ctimer debug_timer;
static void
periodic_debug(void *ptr)
{
  ctimer_set(&debug_timer, 20 * CLOCK_SECOND, periodic_debug, NULL);
  collect_print_stats();
}
#endif /* WITH_PERIODIC_DEBUG */
/*---------------------------------------------------------------------------*/
PROCESS_THREAD(sky_shell_process, ev, data)
{
  PROCESS_BEGIN();

#if WITH_PERIODIC_DEBUG
  ctimer_set(&debug_timer, 20 * CLOCK_SECOND, periodic_debug, NULL);
#endif /* WITH_PERIODIC_DEBUG */

  serial_shell_init();
  shell_blink_init();
  /*  shell_file_init();
      shell_coffee_init();*/
  /*  shell_download_init();
      shell_rime_sendcmd_init();*/
  /*  shell_ps_init();*/
  shell_reboot_init();
  shell_rime_init();
  shell_rime_netcmd_init();
  /*  shell_rime_ping_init();
  shell_rime_debug_init();
  shell_rime_debug_runicast_init();*/
  /*  shell_rime_sniff_init();*/
  shell_sky_init();
  shell_power_init();
  shell_powertrace_init();
  /*  shell_base64_init();*/
  shell_text_init();
  shell_time_init();
  /*  shell_checkpoint_init();*/
  /*  shell_sendtest_init();*/
  shell_rime_unicast_init();
  shell_collect_view_init();

#if DEBUG_SNIFFERS
  rime_sniffer_add(&s);
#endif /* DEBUG_SNIFFERS */
  
  PROCESS_END();
}
/*---------------------------------------------------------------------------*/

As we see above some of the shell_xx_init() are already commented out, this done on the pretext that these features if supported will overflow the Tmote Sky memory and the Code will not compile.

Hence, commented out shell_xx_init() which corresponds to specific set of shell commands, will not be available in this shell

Note: However, if we require any shell_xx_init() features, we can uncomment them but we need to make sure the code compiles such that the sky mote memory doesn't overflow.

Compiling and uploading the Contiki Sky Shell on sky motes

To install a shell on the a node, go to the sky-shell, connect a TMote sky to your computer and upload the shell application on the node.

cd contiki-2.7/examples/sky-shell 
make TARGET=sky sky-shell.upload savetarget

Wait for the compilation and uploading to finish.

To connect to the shell over the USB port, run:

You can now login to the node with the command 

make login

Press the return key to get a shell prompt.

After running the Contiki Shell, you will see the Contiki Sky Shell prompt 

user@instant-contiki:~/contiki-2.7/examples/sky-shell$ make login
using saved target 'sky'
../../tools/sky/serialdump-linux -b115200 /dev/ttyUSB0
connecting to /dev/ttyUSB0 (115200) [OK]

SEND 1 bytes
5.0: Contiki>

Punch in help on the Contiki Shell prompt to see all the available shell commands in Contiki shell. 

help

You can now run any supported shell commands

For example, running echo hello will echo the <text> back on the shell prompt. 

5.0: Contiki> 
echo hello
SEND 11 bytes
hello
5.0: Contiki>

Modify sky-shell project for this tutorial

Replace the sky-shell.c file with the following version of sky-shell.c file

Please copy the below source code into the sky-shell.c file 

/*
 * Copyright (c) 2008, Swedish Institute of Computer Science.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. Neither the name of the Institute nor the names of its contributors
 *    may be used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 * This file is part of the Contiki operating system.
 *
 */

/**
 * \file
 *         Tmote Sky-specific Contiki shell
 * \author
 *         Adam Dunkels <adam@sics.se>
 */

#include "contiki.h"
#include "shell.h"
#include "serial-shell.h"
#include "collect-view.h"

#include "net/rime.h"

/*---------------------------------------------------------------------------*/
PROCESS(sky_shell_process, "Sky Contiki shell");
AUTOSTART_PROCESSES(&sky_shell_process);
/*---------------------------------------------------------------------------*/
#define WITH_PERIODIC_DEBUG 0
#if WITH_PERIODIC_DEBUG
static struct ctimer debug_timer;
static void
periodic_debug(void *ptr)
{
  ctimer_set(&debug_timer, 20 * CLOCK_SECOND, periodic_debug, NULL);
  collect_print_stats();
}
#endif /* WITH_PERIODIC_DEBUG */
/*---------------------------------------------------------------------------*/
PROCESS_THREAD(sky_shell_process, ev, data)
{
  PROCESS_BEGIN();

#if WITH_PERIODIC_DEBUG
  ctimer_set(&debug_timer, 20 * CLOCK_SECOND, periodic_debug, NULL);
#endif /* WITH_PERIODIC_DEBUG */

  serial_shell_init();
  shell_blink_init();
  shell_file_init();

  shell_ps_init();
  shell_reboot_init();

  shell_sky_init();
  shell_power_init();
  shell_powertrace_init();

  shell_text_init();
  shell_time_init();

  shell_collect_view_init();

#if DEBUG_SNIFFERS
  rime_sniffer_add(&s);
#endif /* DEBUG_SNIFFERS */
  
  PROCESS_END();
}
/*---------------------------------------------------------------------------*/

This will create a sky shell with features or shell commands that we will go through in the next section

Please compile the sky-shell project and upload the sky-shell.upload to the Sky mote and Login to the mote as explained in previous section

If successful you should be able to see the following and get a Contiki shell prompt

user@instant-contiki:~/contiki-2.7/examples/sky-shell$ make TARGET=sky sky-shell.upload savetarget
  AR        contiki-sky.a
  CC        sky-shell.c
  CC        ../../platform/sky/./contiki-sky-main.c
  LD        sky-shell.sky
msp430-objcopy sky-shell.sky -O ihex sky-shell.ihex
make IHEXFILE=sky-shell.ihex sky-reset sky-upload
make[1]: Entering directory `/home/user/contiki-2.7/examples/sky-shell'
make -k -j 20 sky-reset-sequence
make[2]: Entering directory `/home/user/contiki-2.7/examples/sky-shell'
../../tools/sky/msp430-bsl-linux --telosb -c /dev/ttyUSB0 -r
MSP430 Bootstrap Loader Version: 1.39-telos-7
Use -h for help
Reset device ...
Done
make[2]: Leaving directory `/home/user/contiki-2.7/examples/sky-shell'
make -j 20 sky-upload-sequence
make[2]: Entering directory `/home/user/contiki-2.7/examples/sky-shell'
+++++ Erasing /dev/ttyUSB0
MSP430 Bootstrap Loader Version: 1.39-telos-7
Use -h for help
Mass Erase...
Transmit default password ...
+++++ Programming /dev/ttyUSB0
MSP430 Bootstrap Loader Version: 1.39-telos-7
Invoking BSL...
Transmit default password ...
Current bootstrap loader version: 1.61 (Device ID: f16c)
Changing baudrate to 38400 ...
Program ...
45722 bytes programmed.
+++++ Resetting /dev/ttyUSB0
MSP430 Bootstrap Loader Version: 1.39-telos-7
Use -h for help
Reset device ...
Done
make[2]: Leaving directory `/home/user/contiki-2.7/examples/sky-shell'
make[1]: Leaving directory `/home/user/contiki-2.7/examples/sky-shell'
saving Makefile.target
rm sky-shell.co obj_sky/contiki-sky-main.o sky-shell.ihex
user@instant-contiki:~/contiki-2.7/examples/sky-shell$ make login
using saved target 'sky'
../../tools/sky/serialdump-linux -b115200 /dev/ttyUSB0
connecting to /dev/ttyUSB0 (115200) [OK]
+�{/#+�3++�&�
SEND 1 bytes
5.0: Contiki>

If you don't end up getting the above set of messages on the comand prompt and end up getting the set of messages on command prompt as shown below, then your setup has not been successful 

user@instant-contiki:~/contiki-2.7/examples/sky-shell$ make TARGET=sky sky-shell.upload savetarget
msp430-objcopy sky-shell.sky -O ihex sky-shell.ihex
make IHEXFILE=sky-shell.ihex sky-reset sky-upload
make[1]: Entering directory `/home/user/contiki-2.7/examples/sky-shell'
make -k -j 20 sky-reset-sequence
make[2]: Entering directory `/home/user/contiki-2.7/examples/sky-shell'
Done
make[2]: Leaving directory `/home/user/contiki-2.7/examples/sky-shell'
make -j 20 sky-upload-sequence
make[2]: Entering directory `/home/user/contiki-2.7/examples/sky-shell'
Done
make[2]: Leaving directory `/home/user/contiki-2.7/examples/sky-shell'
make[1]: Leaving directory `/home/user/contiki-2.7/examples/sky-shell'
saving Makefile.target
rm sky-shell.ihex
user@instant-contiki:~/contiki-2.7/examples/sky-shell$

This indicates that your Tmote Sky mote is disconnected!!!

Make sure that your Tmote Sky mote is connected and try compiling again and it should work this time :) Did you heave a sigh there?

I did! When I figured out what was going wrong.

Nevertheless, we are All Set and Good to Launch now :) :)

Contiki Shell Commands, their usage and Contiki shell programming

Ready to dive in ?

Everyone needs help at some point in time, don't we? So let's punch in help on the Contiki Sky Shell to figure out what all shell commands are at our disposal and we will take them head on, one at a time :)

You should see a list of all available shell commands as shown below:

5.0: Contiki> 
help
SEND 5 bytes
Available commands:
?: shows this help
append <filename>: append to file
binprint: print binary data in decimal format
blink [num]: blink LEDs ([num] times)
collect-view-data: sensor data, power consumption, network stats
echo <text>: print <text>
energy: print energy profile
exit: exit shell
hd: print binary data in hexadecimal format
help: shows this help
kill <command>: stop a specific command
killall: stop all running commands
ls: list files
nodeid: set node ID
null: discard input
power: print power profile
powerconv: convert power profile to human readable output
powertrace [interval]: turn powertracing on or off, with reporting interval <interval>
ps: list all running processes
quit: exit shell
randwait <maxtime> <command>: wait for a random time before running a command
read <filename> [offset] [block size]: read from a file, with the offset and the block size as options
reboot: reboot the system
repeat <num> <time> <command>: run a command every <time> seconds
rfchannel <channel>: change CC2420 radio channel (11 - 26)
rm <filename>: remove the file named filename
sense: print out sensor data
senseconv: convert 'sense' data to human readable format
size: print the size of the input
time [seconds]: output time in binary format, or set time in seconds since 1970
timestamp: prepend a timestamp to data
txpower <power>: change CC2420 transmission power (0 - 31)
write <filename>: write to file
5.0: Contiki>

Lets, go ahead and do the simplest first! echo :)

5.0: Contiki> 
echo howdy contiki shell?
SEND 20 bytes
SEND 6 bytes
howdy contiki shell?
5.0: Contiki> 

Contiki Shell Commands


1) Text Related Commands:

echo <text>: print <text>

binprint: print binary data in decimal format

hd: print binary data in hexadecimal format

size: print the size of the input

shell-text.c : This file holds all the text related shell commands. You can find the source file in this path ~/contiki-2.7/apps/shell

shell_text_init(): This function is used to register text related shell commands with the Contiki Shell.

Examples

echo carpe diem!

5.0: Contiki> 
echo carpe diem!
SEND 17 bytes
carpe diem!
5.0: Contiki>

The following commands prints time data in decimal format.

2943 secs have elapsed since the mote was last power up.

time | binprint 

5.0: Contiki> 
time | binprint
SEND 16 bytes
6 49032 34883 0 65535 0 2943 
5.0: Contiki>

The following command prints data in hexadecimal format.

hd

Press Cntrl+Return

hello world

Press Cntrl+Return to get the shell prompt back after output is printed.

5.0: Contiki> 
hd
SEND 3 bytes
hello world
SEND 12 bytes
0x6568 0x6c6c 0x206f 0x6f77 0x6c72

The following command prints size of the data.

size

Press Cntrl+Return

trojan for life!

Press Cntrl+Return to get the shell prompt back after output is printed.

5.0: Contiki> 
size
SEND 5 bytes
trojan for life!
SEND 17 bytes

SEND 1 bytes
16
5.0: Contiki>
2) Time related Shell commands

time [seconds]: output time in binary format, or set time in seconds since 1970.

repeat <num> : run a command every time seconds.

randwait <maxtime> <command>: wait for a random time before running a command.

timestamp: prepend a timestamp to data.

shell-time.c : This file holds all the time related shell commands. You can find the source file in this path ~/contiki-2.7/apps/shell

shell_time_init(): This function is used to register time related shell commands with the Contiki Shell.

Examples

Following command will set the current time on mote to 10 secs after 1970.

That it forces the time to be set to a value given.

format of print : [len] [clock] [rtimer] [timesynch] [timesynch] [authority] time[1] time[0]

time 10 | binprint 

5.0: Contiki> 
time 10 | binprint
SEND 19 bytes
6 59950 11844 0 65535 0 10 
5.0: Contiki>

Following command will set the current time on mote to 66000 secs after 1970.

Since 66000 > 65536 , time[0] overflows and time[1] has the order bits

time 66000 | binprint 

5.0: Contiki> 
time 66000 | binprint
SEND 20 bytes
SEND 2 bytes
6 39554 33340 0 65535 1 464 
5.0: Contiki>

Following command will print time elapsed every one sec, after waiting for randomtime from the time was reset to 0 secs.

time 0 | randwait 10 {repeat 10 1 {time | binprint}}

Press Cntrl+Return to get the shell prompt back after output is printed.

5.0: Contiki> 
time 0 | randwait 10 {repeat 10 1 {time | binprint}}    
SEND 20 bytes
SEND 20 bytes
SEND 13 bytes
5.0: Contiki> 
6 4870 1641 0 65535 0 9 
6 4998 34372 0 65535 0 10 
6 5126 1604 0 65535 0 11 
6 5254 34372 0 65535 0 12 
6 5382 1605 0 65535 0 13 
6 5510 34372 0 65535 0 14 
6 5638 1604 0 65535 0 15 
6 5766 34372 0 65535 0 16 
6 5894 1604 0 65535 0 17 
6 6022 34372 0 65535 0 18

Following command will print the time elapsed every sec for 100 secs

time | repeat 20 1 {time | binprint}

Press Cntrl+Return to get the shell prompt back after output is printed.

5.0: Contiki> 
time | repeat 20 1 {time | binprint}
SEND 20 bytes
SEND 17 bytes
�z�^z���
5.0: Contiki> 
6 35963 31502 0 65535 0 251 
6 36090 64068 0 65535 0 252 
6 36218 31300 0 65535 0 253 
6 36346 64068 0 65535 0 254 
6 36474 31300 0 65535 0 255 
6 36602 64068 0 65535 0 256 
6 36730 31300 0 65535 0 257 
6 36858 64068 0 65535 0 258 
6 36986 31300 0 65535 0 259 
6 37114 64068 0 65535 0 260 
6 37242 31300 0 65535 0 261 
6 37370 64068 0 65535 0 262 
6 37498 31300 0 65535 0 263 
6 37626 64068 0 65535 0 264 
6 37754 31300 0 65535 0 265 
6 37882 64068 0 65535 0 266 
6 38010 31300 0 65535 0 267 
6 38138 64068 0 65535 0 268 
6 38266 31300 0 65535 0 269 
6 38394 64068 0 65535 0 270

prints hello 4 times every 1 time step and immediately gets back to prompt and runs the command in the background

repeat 4 1 {echo hello} &

Press Cntrl+Return to get the shell prompt back after output is printed.

5.0: Contiki> 
repeat 4 1 {echo hello} &
SEND 20 bytes
SEND 6 bytes
5.0: Contiki> 
hello
hello
hello
hello

SEND 1 bytes
5.0: Contiki>

3) File System Related Commands:

ls: list files

write <filename>: write to file. To write a string of character to a file.

read <filename> [offset] [block size]: read from a file, with the offset and the block size as options. The offset is the number of characters that must be skipped before reading the file, starting from 0. The block size option separates the output of the read functions in blocks of size block size.

append <filename>: append to file.

rm <filename>: remove the file named filename.

shell-file.c : This file holds all the file system related shell commands. You can find the source file in this path ~/contiki-2.7/apps/shell

shell_file_init(): This function is used to register file system related shell commands with the Contiki Shell.

Examples

Following command echos the text and is written to a file

echo howdy? | write msg.txt

echo hi! | write hi.txt

read msg.txt 0 6

ls

5.0: Contiki> 
echo howdy? | write msg.txt
SEND 20 bytes
SEND 8 bytes
howdy?
5.0: Contiki> 
echo hi! | write hi.txt
SEND 20 bytes
SEND 4 bytes
hi!
5.0: Contiki> 
read msg.txt 0 6 
SEND 18 bytes
howdy?
5.0: Contiki> 
ls
SEND 3 bytes
58 
6 msg.txt
3 hi.txt
Total size: 67
5.0: Contiki>

The following set of commands repeats hey text 4 times every time step and appends the text into a file. Removes all the existing files later

repeat 4 1 {echo hey | append logfile.txt}

read logfile.txt 0 3

ls

rm msg.txt

rm hi.txt

rm logfile.txt

ls

5.0: Contiki> 
repeat 4 1 {echo hey | append logfile.txt}
SEND 20 bytes
SEND 20 bytes
SEND 3 bytes
hey
hey
hey
hey
5.0: Contiki> 
read logfile.txt 0 3
SEND 20 bytes
SEND 1 bytes
hey
hey
hey
hey
5.0: Contiki> 
ls
SEND 3 bytes
58 
6 msg.txt
3 hi.txt
12 logfile.txt
Total size: 79
5.0: Contiki> 
rm msg.txt
SEND 11 bytes
5.0: Contiki> 
rm hi.txt
SEND 10 bytes
5.0: Contiki> 
rm logfile.txt
SEND 15 bytes
5.0: Contiki> 
ls
SEND 3 bytes
58 
Total size: 58
5.0: Contiki>
4) Sky mote Related Commands:

sense: print out sensor data.

<\p> senseconv: convert 'sense' data to human readable format.<p><\p> nodeid: set node ID, If no node ID was given on the command line, we print out the current nodeid or else we burn the new node ID.<p><\p> txpower <power>: change CC2420 transmission power (0 - 31).If no power was given on the command line, we print out the current power.<p><\p> rfchannel <channel>: change CC2420 radio channel (11 - 26).If no channel was given on the command line, we print out thecurrent channel.<p><\p> shell-sky.c : This file holds all the sky mote related shell commands. You can find the source file in this path ~/contiki-2.7/apps/shell.<p>

shell_sky_init(): This function is used to register sky mote related shell commands with the Contiki Shell.

Examples

This set of commands prints the sensor data in human readable format

sense|senseconv

5.0: Contiki> 
sense|senseconv
SEND 16 bytes
Light 1 4
Light 2 13
Temperature 615.7
Relative humidity 2650
RSSI 8
Voltage 2.5
5.0: Contiki>

Following command prints out the txpower as 5, which is being set

Print format: msglen power

txpower 5 | binprint

5.0: Contiki> 
txpower 5 | binprint
SEND 20 bytes
SEND 1 bytes
1 5 
5.0: Contiki>

Following command prints out the rfchannel as 15, which is being set

Print format: msglen channelno

rfchannel 15| binprint

5.0: Contiki> 
rfchannel 15| binprint
SEND 20 bytes
SEND 3 bytes
1 15 
5.0: Contiki>

Following command outputs the sensor measurements every time step 4 times and appends to a file

repeat 4 1 {sense | senseconv | append logfile.txt}

read logfile.txt 0 36

5.0: Contiki> 
repeat 4 1 {sense | senseconv | append logfile.txt}
SEND 20 bytes
SEND 20 bytes
SEND 12 bytes
Light 1 5
Light 2 13
Temperature 615.7
Relative humidity 2650
RSSI 11
Voltage 2.5
Light 1 4
Light 2 13
Temperature 615.7
Relative humidity 2650
RSSI 8
Voltage 2.5
Light 1 4
Light 2 13
Temperature 615.7
Relative humidity 2650
RSSI 2
Voltage 2.5
Light 1 4
Light 2 13
Temperature 615.7
Relative humidity 2650
RSSI 0
Voltage 2.5
5.0: Contiki> 
read logfile.txt 0 36
SEND 20 bytes
SEND 2 bytes
Light 1 5Light 2 13Temperature 615.7
Relative humidity 2650RSSI 11Voltage
 2.5Light 1 4Light 2 13Temperature 6
15.7Relative humidity 2650RSSI 8Volt
age 2.5Light 1 4Light 2 13Temperatur
e 615.7Relative humidity 2650RSSI 2V
oltage 2.5Light 1 4Light 2 13Tempera
ture 615.7Relative humidity 2650RSSI
 0Voltage 2.5
5.0: Contiki>
Retrieved from "http://anrg.usc.edu/contiki/index.php?title=Contiki_Shell&oldid=1422"